Description
Flocea advice sheet
Pillow tank 30 m³ 30,000 litres – agricultural water storage and irrigation — the right choice when the project is properly scoped
This pillow tank of 30 m³ (30,000 litres) answers a requirement for agricultural water storage and irrigation. It suits farms, market gardens, livestock units, estates and irrigation sites needing a dependable reserve that installs quickly and fits the ground conditions.
The point that changes everything
On a farm, an undersized tank always shows up at the worst moment: peak irrigation, a heatwave, or difficult access.
The right choice starts from the autonomy required, the pump flow rate, the refill frequency and the space available.
What this tank actually solves
buffer storage securing irrigation or stock watering
installation with no open lagoon and no heavy concrete structure
can be relocated when empty as fields or buildings change
Flocea advice: this volume suits professional, agricultural or community use, or a safety reserve with meaningful autonomy.
Choose it if…
- creating buffer storage for irrigation or farm use
- adding storage quickly without an open lagoon
- matching the fittings to how the holding actually works
Avoid it if…
- the siting area is not stabilised or not accessible to machinery
- the expected flow rate was not given before ordering
Specifications to lock down
The technical figures that prevent nasty surprises
The product page is for choosing the volume; the quotation is what locks down the fittings and the filling arrangement. Dimensions, fittings, accessories and installation conditions are to be confirmed for your site.
- Usable capacity
- 30,000 litres (30 m³)
- Tank type
- closed, self-supporting pillow tank
- Installation
- on level, clean, stabilised and protected ground
- Installation
- no heavy groundworks, with base preparation
- Connections
- to confirm against use, pump, filling and draw-off
- Main application
- agricultural
Installation: the correct sequence
- Preparea level, clean, compacted area free of sharp features.
- Protectlay the appropriate ground protection.
- Connectposition inlets, outlets, valves, pump and overflow.
- Checkkeep access for filling, emptying and maintenance.
- Commissionfill progressively and check how the whole installation behaves.
Recommended use and compatibility
irrigation water, raw water, rainwater and non-food agricultural uses depending on configuration. If your installation has to meet a particular requirement, ask for confirmation before ordering so that the right membrane and fittings are specified.
Frequently asked questions before ordering
How much space does a 30 m³ pillow tank need?
The exact area depends on the format chosen and on the fittings. The base must be level, stable, free of anything that could puncture it, and accessible both for filling and for maintenance. Flocea confirms the usable dimensions before sign-off.
Can this tank be connected to a pump?
Yes, provided the outlets, valves and accessories are specified at the point of order. Tell us the flow rate you expect, so the installation is not undersized.
Does the tank arrive ready to install?
The tank is delivered folded, with the equipment listed in the quotation. Ground preparation, protection, external fittings and any pump must be planned according to the site.
Should I take this volume or the next size up?
If your need is seasonal, regulatory or awkward to replenish, allow a margin. The next size up avoids over-frequent refilling and secures your autonomy.
Next step
Torn between two volumes or two connection layouts?
Send us the application, the volume you have in mind, the liquid stored and the site constraints. Flocea checks the sizing before order or quotation.
