Description
Flocea advice sheet
Pillow tank 8 m³ 8,000 litres – temporary or permanent potable water storage — the right choice when the project is properly scoped
This pillow tank of 8 m³ (8,000 litres) answers a requirement for temporary or permanent potable water storage. It suits local authorities, construction sites, remote locations, businesses and emergency needs calling for a dependable reserve that installs quickly and fits the ground.
The point that changes everything
With potable water the question is not just volume — it is the sanitary suitability of the entire chain.
The membrane, the fittings, the commissioning procedure and how the water is turned over must all be validated before purchase.
What this tank actually solves
a solution dedicated to storing water intended for human consumption, according to the configuration chosen
capacity available with no heavy civil engineering
adaptable connections for filling, draw-off and level monitoring
Flocea advice: this volume suits a house, a workshop, a smallholding or a mid-sized buffer reserve.
Choose it if…
- securing a reserve intended for potable use, according to configuration
- equipping a remote site, a construction project, a local authority or an emergency need
- gaining usable volume without heavy civil engineering
Avoid it if…
- the installation does not allow water quality and turnover to be monitored
- the fittings or accessories are not suitable for potable use
Specifications to lock down
The technical figures that prevent nasty surprises
Before sign-off, the exact use of the water and every component in contact with it must be confirmed. Dimensions, fittings, accessories and installation conditions are to be confirmed for your site.
- Usable capacity
- 8,000 litres (8 m³)
- Tank type
- closed, self-supporting pillow tank
- Installation
- on level, clean, stabilised and protected ground
- Installation
- no heavy groundworks, with base preparation
- Connections
- to confirm against use, pump, filling and draw-off
- Main application
- potable water
Installation: the correct sequence
- Preparea level, clean, compacted area free of sharp features.
- Protectlay the appropriate ground protection.
- Connectposition inlets, outlets, valves, pump and overflow.
- Checkkeep access for filling, emptying and maintenance.
- Commissionfill progressively and check how the whole installation behaves.
Recommended use and compatibility
potable water only where the membrane, fittings and installation procedure are suited to that use. If your installation has to meet a particular requirement, ask for confirmation before ordering so that the right membrane and fittings are specified.
Frequently asked questions before ordering
How much space does a 8 m³ pillow tank need?
The exact area depends on the format chosen and on the fittings. The base must be level, stable, free of anything that could puncture it, and accessible both for filling and for maintenance. Flocea confirms the usable dimensions before sign-off.
Can this tank be connected to a pump?
Yes, provided the outlets, valves and accessories are specified at the point of order. Tell us the flow rate you expect, so the installation is not undersized.
Does the tank arrive ready to install?
The tank is delivered folded, with the equipment listed in the quotation. Ground preparation, protection, external fittings and any pump must be planned according to the site.
Should I take this volume or the next size up?
If your need is seasonal, regulatory or awkward to replenish, allow a margin. The next size up avoids over-frequent refilling and secures your autonomy.
Next step
Torn between two volumes or two connection layouts?
Send us the application, the volume you have in mind, the liquid stored and the site constraints. Flocea checks the sizing before order or quotation.
