Petrol water pump 100 mm – 60 m³/h

100 mm petrol water pump, price on application. Maximum flow: 60 m³/h. Maximum head: 30 m. Maximum suction lift: 8 m. Flocea advice on choosing to suit your water, your hoses and your use.

Technical assessment
Requirements checked before quotation

Tailored response
Configuration matched to your site

Tracked delivery
Arranged to suit the project

Flocea support
A named point of contact

SKU: FLO-MTE-100-60
Category:

Description

A large-output petrol water pump for shifting water quickly on a farm, at a pond, at a fire-water reserve or on a remote site. This page is built to help you pick the right petrol engine-driven pump matched to flow rate, discharge head and how it will actually be used on site.

60 m³/hmaximum flow rate
100 mminlet / outlet
30 mmaximum total head
8 mmaximum suction lift

To validate before ordering: expected flow rate, height between water source and outlet, hose length, friction losses, water type and how often it will run. Flocea can check these before quoting.

What is it for?

  • High-volume irrigation
  • Filling a pillow tank
  • Farm transfer
  • Topping up water for site work or fire-fighting

This model suits large transfers or installations needing a high flow with some head in reserve. For water carrying solids, abrasives or mud, the hydraulic suitability has to be confirmed first.

Technical specification

Inlet / outlet size 100 mm
Maximum flow rate 60 m³/h
Maximum head 30 m
Maximum suction lift 8 m
Engine 186F petrol
Power 9 kW at 3,600 rpm
Starting manual
Pump casing aluminium alloy
Oil capacity 1.6 L
Indicative weight 65 kg
Indicative dimensions 640 x 480 x 605 mm

How to choose within the petrol range

Model Flow rate TDH Recommended use
50 mm 22 m³/h 15 m mobile, occasional duties with short hoses, moderate flow and clean water.
80 mm 45 m³/h 25 m the best balance of size, flow and versatility in a petrol engine-driven pump.
100 mm 60 m³/h 30 m large transfers or installations needing high flow with headroom on total head.

Flocea advice

Une petrol water pump makes sense where the site has no reliable electrical supply, or where the duty is mobile. For a fixed installation, an electric or solar pump needs less maintenance. Flocea can compare the options on running cost, energy available and the flow required.

Frequently asked questions

Does this engine-driven pump work without electricity?

Yes. The petrol engine pumps without any electrical supply. It must be run outdoors or in a very well ventilated area.

Is the quoted flow rate always achieved on site?

No. Real flow depends on discharge head, hose length, bore, bends, valves and friction losses. That is precisely why Flocea offers a sizing service.

Can it feed a pillow tank or a fire-water reserve?

Yes, depending on target flow, couplings and discharge head. For a fire-water reserve, check the regulatory requirement and how it will be used.